WMH Transmissions Ltd - Product List

  • Home
  • Login
  • Products
  • Contact Us
  • Vacancies
  • Delivery Information
  • Find Us
  • TELEPHONE NUMBER 01827 310311

  • HIWIN LINEAR GUIDEWAYS
    • HG SERIES
      • HG RAILS
      • HG BLOCKS
      • QH BLOCKS
    • EG SERIES
      • EG RAILS
      • EG BLOCKS
    • MG SERIES
      • MGN RAILS
      • MGW RAIL
      • MG BLOCKS
    • RG SERIES
      • RG RAILS
      • RG BLOCKS
    • WE SERIES
      • WE RAILS
      • WE BLOCKS
    • ZIMMER CLAMPS
      • HAND CLAMP
      • PNEUMATIC CLAMP
      • ADAPTING PLATES
  • HIWIN BALLSCREWS & NUTS
    • BALLSCREWS - ROLLED
      • SIZE 10 RIGHT HAND
      • SIZE 12 RIGHT HAND
      • SIZE 14 RIGHT HAND
      • SIZE 16 RIGHT HAND
      • SIZE 20 RIGHT HAND
      • SIZE 25 RIGHT HAND
      • SIZE 32 RIGHT HAND
      • SIZE 40 RIGHT HAND
      • SIZE 50 RIGHT HAND
      • SIZE 63 RIGHT HAND
      • SIZE 80 RIGHT HAND
    • BALLSCREW NUTS
      • FSI TYPE
      • FSR TYPE
      • FSC TYPE
      • FSH TYPE
      • RSB TYPE
      • SSV TYPE
  • SUPPORT BEARINGS
    • DUKI TECH ®
      • BK TYPE
      • BF TYPE
      • FK TYPE
      • FF TYPE
    • SONYUNG ®
      • BK TYPE
      • BF TYPE
      • FK TYPE
      • FF TYPE
  • HIWIN KK UNITS - LINEAR STAGES
    • STANDARD GRADE TYPE C
      • SIZE KK40
      • SIZE KK50
      • SIZE KK60 (5MM PITCH)
      • SIZE KK60 (10MM PITCH)
      • SIZE KK86 (10MM PITCH)
      • SIZE KK86 (20MM PITCH)
      • SIZE KK100
      • SIZE KK130
    • PRECISION GRADE TYPE P
      • SIZE KK40
      • SIZE KK50
      • SIZE KK60 (5MM PITCH)
      • SIZE KK60 (10MM PITCH)
      • SIZE KK86 (10MM PITCH)
      • SIZE KK86 (20MM PITCH)
      • SIZE KK100
      • SIZE KK130
  • SERVO MOTORS & DRIVERS
    • SERVO MOTORS
      • 50 WATT
      • 100 WATT
      • 200 WATT
      • 400 WATT
      • 750 WATT
    • SERVO DRIVERS
      • 50 WATT - 400 WATT
      • 750 WATT
    • CABLES / ACCESSORIES
  • HIWIN LINEAR ACTUATORS
    • LAS-1 12 VOLT 1200 N
    • LAS-1 24 VOLT 1200 N
    • LAS-2 12 VOLT 600 N
    • LAS-2 24 VOLT 600 N
    • LAS-3 12 VOLT 1200 N
    • LAS-3 24 VOLT 1200 N
    • LAS-4 12 VOLT 800 N
    • LAS-4 24 VOLT 800 N
  • LINEAR BEARINGS & SHAFTS
    • GROUND SHAFTS
      • HARDENED GROUND STEEL
      • STAINLESS STEEL
      • SHAFT SUPPORTS
      • SUPPORT RAILS
    • LINEAR BEARINGS
      • CYLINDRICAL
      • CYLINDRICAL - LONG
      • ROUND FLANGE
      • ROUND FLANGE - LONG
      • SQUARE FLANGE
      • SQUARE FLANGE - LONG
  • SAMICK LINEAR BEARINGS
    • SAMICK LINEAR BEARINGS
      • LM
      • LME
      • LMEF
      • LMEK
      • LMES
      • LMF
      • LMK
    • SAMICK BEARING HOUSING
      • SC
      • SCE
  • AUTOMATIC LUBRICATION PUMPS
    • BATTERY DRIVEN
      • GREASE LUBRICATION
      • OIL LUBRICATION
    • PLC DRIVEN 24V
      • GREASE LUBRICATION
      • OIL LUBRICATION
  • RACKS
    • COMMERCIAL RACKS
      • EN8
    • PRECISION RACKS
      • EN8
      • EN8 - ENDS MACHINED (CONTINUOUS MOUNTED)
      • EN24 'T'
      • EN24 'T' - PRE-DRILLED
      • STAINLESS STEEL (CONTINUOUS MOUNTED)
    • GROUND RACKS
      • EN32 - GROUND TEETH (CASE HARD)
      • EN32 - GROUND TEETH (CASE HARD) PRE-DRILLED
    • HELICAL RACKS
      • EN8 - INDUCTION HARDENED
      • EN8 - INDUCTION HARDENED - PRE-DRILLED
      • EN24 'T'
      • EN24 'T' - PRE-DRILLED
      • EN32 - GROUND TEETH (CASE HARDENED)
      • EN32 - GROUND TEETH (CASE HARDENED) - PRE-DRILLED
    • ROUND RACKS
      • EN8
      • EN8 - ENDS MACHINED (CONTINUOUS MOUNTED)
      • EN24 'T' - ENDS MACHINED (COUNTINUOUS MOUNTED)
      • STAINLESS STEEL
    • NYLON RACKS
      • 1.0 MODULE
      • 1.5 MODULE
      • 2.0 MODULE
      • 2.5 MODULE
      • 3.0 MODULE
    • HARDENED RACKS
      • EN8 INDUCTION HARDENED
      • EN8 INDUCTION HARDENED - PRE-DRILLED
      • EN8 INDUCTION HARDENED - MILLED TEETH
      • EN32 - GROUND TEETH (CASE HARD)
      • EN32 - GROUND TEETH (CASE HARD) - PRE-DRILLED
  • SPUR GEARS
    • COMMERCIAL GEARS
      • EN8
    • PRECISION GEARS
      • EN8
      • EN24 'T'
      • STAINLESS STEEL
    • GROUND GEARS
      • EN32 GROUND TEETH (CASE HARDENED)
    • HELICAL GEARS
      • EN8 MILLED TEETH
      • EN32 GROUND TEETH (CASE HARDENED)
    • NYLON GEARS
      • 1.0 MODULE
      • 1.5 MODULE
      • 2.0 MODULE
      • 2.5 MODULE
    • HARDENED GEARS
      • EN8 - INDUCTION HARDENED
  • BEVEL GEARS
    • BEVEL GEARS - EN8 (1:1 RATIO)
      • 1.0 MODULE
      • 1.5 MODULE
      • 2.0 MODULE
      • 2.5 MODULE
      • 3.0 MODULE
      • 3.5 MODULE
      • 4.0 MODULE
      • 4.5 MODULE
      • 5.0 MODULE
      • 6.0 MODULE
    • BEVEL GEARS - EN8 (1 : 1.5 RATIO)
      • 1.0 MODULE
      • 1.5 MODULE
      • 2.0 MODULE
      • 2.5 MODULE
      • 3.0 MODULE
      • 3.5 MODULE
      • 4.0 MODULE
      • 4.5 MODULE
      • 5.0 MODULE
      • 6.0 MODULE
    • BEVEL GEARS - EN8 (1 : 2 RATIO)
      • 1.0 MODULE
      • 1.5 MODULE
      • 2.0 MODULE
      • 2.5 MODULE
      • 3.0 MODULE
      • 3.5 MODULE
      • 4.0 MODULE
      • 4.5 MODULE
      • 5.0 MODULE
      • 6.0 MODULE
    • BEVEL GEARS - EN8 (1 : 2.5 RATIO)
      • 1.0 MODULE
      • 1.5 MODULE
      • 2.0 MODULE
      • 2.5 MODULE
      • 3.0 MODULE
      • 3.5 MODULE
      • 4.0 MODULE
      • 4.5 MODULE
      • 5.0 MODULE
      • 6.0 MODULE
    • BEVEL GEARS - EN8 (1 : 3 RATIO)
      • 1.0 MODULE
      • 1.5 MODULE
      • 2.0 MODULE
      • 2.5 MODULE
      • 3.0 MODULE
      • 3.5 MODULE
      • 4.0 MODULE
      • 4.5 MODULE
      • 5.0 MODULE
      • 6.0 MODULE
    • BEVEL GEARS - EN8 (1 : 4 RATIO)
      • 1.0 MODULE
      • 1.5 MODULE
      • 2.0 MODULE
      • 2.5 MODULE
      • 3.0 MODULE
      • 3.5 MODULE
      • 4.0 MODULE
      • 4.5 MODULE
      • 5.0 MODULE
      • 6.0 MODULE
  • BEVEL GEAR UNITS
    • 1 : 1 RATIO
      • HOLLOW OUTPUT
      • 1 INPUT / 1 OUTPUT
      • 1 INPUT / 2 OUTPUT
      • 2 INPUT / 2 OUTPUT
    • 2 : 1 RATIO
      • HOLLOW OUTPUT
      • 1 INPUT / 1 OUTPUT
      • 1 INPUT / 2 OUTPUT
      • 2 INPUT / 2 OUTPUT
    • 3 : 1 RATIO
      • HOLLOW OUTPUT
      • 1 INPUT / 1 OUTPUT
      • 1 INPUT / 2 OUTPUT
      • 2 INPUT / 2 OUTPUT
  • LEADSCREWS
    • ROLLED - COMMERCIAL RANGE
      • RIGHT HAND - STEEL
      • RIGHT HAND - STAINLESS STEEL
      • LEFT HAND - STEEL
      • LEFT HAND - STAINLESS STEEL
    • WHIRLED - PRECISION RANGE
      • RIGHT HAND - STEEL
      • RIGHT HAND - STAINLESS STEEL
      • LEFT HAND - STEEL
      • LEFT HAND - STAINLESS STEEL
    • 2 - START LEADSCREWS
      • SIZE 12 X 6 P3
      • SIZE 16 X 8 P4
      • SIZE 18 X 8 P4
      • SIZE 20 X 8 P4
      • SIZE 24 X 10 P5
      • SIZE 30 X 12 P6
      • SIZE 36 X 12 P6
      • SIZE 40 X 14 P7
    • HAND WHEELS
    • DIGITAL INDICATORS
  • LEADSCREW NUTS
    • RIGHT HAND NUTS
      • ROUND NUTS
      • FLANGED NUTS
      • HEXAGONAL NUTS
    • LEFT HAND NUTS
      • ROUND NUTS
      • FLANGED NUTS
      • HEXAGONAL NUTS
    • 2 - START NUTS
      • ROUND - BRONZE
      • FLANGED - BRONZE
  • COUPLINGS
    • ROTEX ® JAW TYPE COUPLINGS - STEEL
    • ROTEX ® GS BACKLASH FREE JAW
    • ROTEX ® JAW TYPE COUPLINGS - CAST FINISH
    • ROTEX ® JAW TYPE COUPLINGS - STAINLESS STEEL
    • ROTEX ® GS BACKLASH FREE JAW COUPLING CLAMPING HUB TYPE
    • ROTEX ® SPIDERS
      • ROTEX 14 SPIDERS
      • ROTEX GS 14 SPIDERS
      • ROTEX 19 SPIDERS
      • ROTEX GS 19 SPIDERS
      • ROTEX 24 SPIDERS
      • ROTEX GS 24 SPIDERS
      • ROTEX 28 SPIDERS
      • ROTEX GS 28 SPIDERS
      • ROTEX 38 SPIDERS
      • ROTEX GS 38 SPIDERS
      • ROTEX 42 SPIDERS
      • ROTEX GS 42 SPIDERS
      • ROTEX 48 SPIDERS
      • ROTEX GS 48 SPIDERS
      • ROTEX 55 SPIDERS
      • ROTEX GS 55 SPIDERS
      • ROTEX 65 SPIDERS
      • ROTEX 75 SPIDERS
      • ROTEX 90 SPIDERS
    • BOWEX ® CURVED TOOTH GEAR COUPLINGS
  • SCREW JACKS
    • TRAVELLING SCREW TYPE
      • 250 KG LOAD / CAPACITY
      • 500 KG LOAD / CAPACITY
      • 1,000 KG LOAD / CAPACITY
      • 2,500 KG LOAD / CAPACITY
      • 5,000 KG LOAD / CAPACITY
      • 10,000 KG LOAD / CAPACITY
      • 15,000 KG LOAD / CAPACITY
      • 20,000 KG LOAD / CAPACITY
      • 25,000 KG LOAD / CAPACITY
      • 35,000 KG LOAD / CAPACITY
    • TRAVELLING NUT TYPE
      • 250 KG LOAD / CAPACITY
      • 500 KG LOAD / CAPACITY
      • 1,000 KG LOAD / CAPACITY
      • 2,500 KG LOAD / CAPACITY
      • 5,000 KG LOAD / CAPACITY
      • 10,000 KG LOAD / CAPACITY
      • 15,000 KG LOAD / CAPACITY
      • 20,000 KG LOAD / CAPACITY
      • 25,000 KG LOAD / CAPACITY
      • 35,000 KG LOAD / CAPACITY
    • STEEL TOP PLATES
    • STEEL CLEVIS
    • EXPANSION BELLOWS
    • HAND WHEELS
  • SPLINED SHAFTS
    • SIZE 6 X 11 X 14
    • SIZE 6 X 13 X 16
    • SIZE 6 X 16 X 20
    • SIZE 6 X 18 X 22
    • SIZE 6 X 21 X 25
    • SIZE 6 X 23 X 28
    • SIZE 6 X 26 X 32
    • SIZE 6 X 28 X 34
    • SIZE 8 X 32 X 38
    • SIZE 8 X 36 X 42
    • SIZE 8 X 42 X 48
    • SIZE 8 X 46 X 54
    • SIZE 6 X 28,14 X 34,94
  • SPLINED SLEEVES
    • STEEL
      • ROUND STEEL
      • FLANGED STEEL - WITHOUT HOLES
      • FLANGED STEEL - WITH HOLES
    • BRONZE
      • FLANGED BRONZE - WITHOUT HOLES
      • FLANGED BRONZE - WITH HOLES
  • TRANTORQUE BUSHES
    • MINI SERIES
    • GT STANDARD SERIES
  • WORMS & WHEELS
    • 50MM CENTRES
      • WORMS - HARDENED / GROUND
      • WORMS - NOT HARDENED / NOT GROUND
      • WORMS - BORED
      • WORM WHEELS - SPECIAL BRONZE / STEEL HUB
      • WORM WHEELS - CAST IRON
    • 63MM CENTRES
      • WORMS - HARDENED / GROUND
      • WORMS - NOT HARDENED / NOT GROUND
      • WORMS - BORED
      • WORM WHEELS - SPECIAL BRONZE / STEEL HUB
      • WORM WHEELS - CAST IRON
    • 80MM CENTRES
      • WORMS - HARDENED / GROUND
      • WORMS - NOT HARDENED / NOT GROUND
      • WORMS - BORED
      • WORM WHEELS - SPECIAL BRONZE / STEEL HUB
      • WORM WHEELS - CAST IRON
    • 100MM CENTRES
      • WORMS - HARDENED / GROUND
      • WORMS - NOT HARDENED / NOT GROUND
      • WORMS - BORED
      • WORM WHEELS - SPECIAL BRONZE / STEEL HUB
      • WORM WHEELS - CAST IRON
    • 125MM CENTRES
      • WORMS - HARDENED / GROUND
      • WORMS - NOT HARDENED / NOT GROUND
      • WORMS - BORED
      • WORM WHEELS - SPECIAL BRONZE / STEEL HUB
      • WORM WHEELS - CAST IRON
  • SPROCKETS & CHAINS
    • 3/8" PITCH (06B)
      • 3/8" PITCH (06B) SPROCKETS
      • 3/8" PITCH (06B) PLATEWHEELS
      • 3/8" PITCH (06B) CHAIN
    • 1/2" PITCH (08B)
      • 1/2" PITCH (08B) SPROCKETS
      • 1/2" PITCH (08B) PLATEWHEELS
      • 1/2" PITCH (08B) CHAIN
    • 5/8" PITCH (10B)
      • 5/8" PITCH (10B) SPROCKETS
      • 5/8" PITCH (10B) PLATEWHEELS
      • 5/8" PITCH (10B) CHAIN
    • 3/4" PITCH (12B-1)
      • 3/4" PITCH (12B-1) SPROCKETS
      • 3/4" PITCH (12B-1) PLATEWHEELS
      • 3/4" PITCH (12B-1) CHAIN
    • 1" PITCH (16B)
      • 1" PITCH (16B) SPROCKETS
      • 1" PITCH (16B) PLATEWHEELS
      • 1" PITCH (16B) CHAIN
    • 1 1/4" PITCH (20B)
      • 1 1/4" PITCH (20B) SPROCKETS
      • 1 1/4" PITCH (20B) PLATEWHEELS
      • 1 1/4" PITCH (20B) CHAIN
    • 1 1/2" PITCH (24B)
      • 1 1/2" PITCH (24B) SPROCKETS
      • 1 1/2" PITCH (24B) PLATEWHEELS
      • 1 1/2" PITCH (24B) CHAIN
    • 1 3/4" PITCH (28B)
      • 1 3/4" PITCH (28B) SPROCKETS
      • 1 3/4" PITCH (28B) PLATEWHEELS
      • 1 3/4" PITCH (28B) CHAIN
    • 2" PITCH (32B)
      • 2" PITCH (32B) SPROCKETS
      • 2" PITCH (32B) PLATEWHEELS
      • 2" PITCH (32B) CHAIN
  • CUSTOMERS SPECIAL PARTS
  • You are in Home
  • > Product List
  • > WORMS & WHEELS
  • > WORMS AND WHEELS
  • > WORMS AND WHEELS
Image for WORMS AND WHEELS

WORM WHEELS - SPECIAL BRONZE / STEEL HUB

Product Code Description Price
Image for 176-540-430 176-540-430 7,5:1 RATIO 80MM CENTRE WORM 4.0 MOD STEEL NOT HARD/GROUND £190.84 (exc VAT)
Image for 176-531-440 176-531-440 10,0:1 RATIO 80 MM CENTRE WORM 3.15 MOD STEEL NOT HARD/GROUN £199.02 (exc VAT)
Image for 176-525-450 176-525-450 12,5:1 RATIO 80MM CENTRE WORM 2.5 MOD STEEL NOT HARD/GROUND £175.40 (exc VAT)
Image for 176-540-230 176-540-230 15,0:1 RATIO 80MM CENTRE WORM 4.0 MOD STEEL NOT HARD/GROUND £189.94 (exc VAT)
Image for 176-531-240 176-531-240 20,0:1 RATIO 80MM CENTRE WORM 3.15 MOD STEEL NOT HARD/GROUND £196.30 (exc VAT)
Image for 176-525-250 176-525-250 25,0:1 RATIO 80MM CENTRE WORM 2.5 MOD STEEL NOT HARD/GROUND £174.49 (exc VAT)
Image for 176-540-130 176-540-130 30,0:1 RATIO 80MM CENTRE WORM 4.0 MOD STEEL NOT HARD/GROUND £169.94 (exc VAT)
Image for 176-531-140 176-531-140 40,0:1 RATIO 80MM CENTRE WORM 3.15 MOD STEEL NOT HARD/GROUND £157.22 (exc VAT)
Image for 176-525-150 176-525-150 50,0:1 RATIO 80MM CENTRE WORM 2.5 MOD STEEL NOT HARD/GROUND £167.22 (exc VAT)
Image for 176-520-162 176-520-162 62,0:1 RATIO 80MM CENTRE WORM 2.0 MOD STEEL NOT HARD/GROUND £153.58 (exc VAT)
Image for 176-516-182 176-516-182 80,0:1 RATIO 80MM CENTRE WORM 1.6 MOD STEEL NOT HARD/GROUND £106.33 (exc VAT)

Your basket is empty
Display VAT Inclusive prices.

FK8FIXED FLANGED BEARING UNIT SUIT 8mm SHAFT
FK40FIXED FLANGED BEARING UNIT SUIT 40mm SHAFT
Catalogue Request Transmission Products Linear Motion Products SagePay
Privacy Policy
Driven by OGL Software Page Generated in 0.893 seconds
© WMH Transmissions LTD. All Rights Reserved 2008