WMH Transmissions Ltd - Product List

HIWIN LINEAR GUIDEWAYS
- HG SERIES
- EG SERIES
  - EG RAILS
  - EG BLOCKS
- MG SERIES
- RG SERIES
  - RG RAILS
  - RG BLOCKS
- WE SERIES
  - WE RAILS
  - WE BLOCKS
- ZIMMER CLAMPS
HIWIN BALLSCREWS & NUTS
- BALLSCREWS - ROLLED
- BALLSCREW NUTS
  - FSI TYPE
  - FSR TYPE
  - FSC TYPE
  - FSH TYPE
  - RSB TYPE
  - SSV TYPE
SUPPORT BEARINGS
- DUKI TECH ®
  - BK TYPE
  - BF TYPE
  - FK TYPE
  - FF TYPE
- SONYUNG ®
  - BK TYPE
  - BF TYPE
  - FK TYPE
  - FF TYPE
HIWIN KK UNITS - LINEAR STAGES
- STANDARD GRADE TYPE C
- PRECISION GRADE TYPE P
SERVO MOTORS & DRIVERS
- SERVO MOTORS
  - 50 WATT
  - 100 WATT
  - 200 WATT
  - 400 WATT
  - 750 WATT
- SERVO DRIVERS
  - 50 WATT - 400 WATT
  - 750 WATT
- CABLES / ACCESSORIES
HIWIN LINEAR ACTUATORS
- LAS-1 12 VOLT 1200 N
- LAS-1 24 VOLT 1200 N
- LAS-2 12 VOLT 600 N
- LAS-2 24 VOLT 600 N
- LAS-3 12 VOLT 1200 N
- LAS-3 24 VOLT 1200 N
- LAS-4 12 VOLT 800 N
- LAS-4 24 VOLT 800 N
LINEAR BEARINGS & SHAFTS
- GROUND SHAFTS
- LINEAR BEARINGS
SAMICK LINEAR BEARINGS
- SAMICK LINEAR BEARINGS
  - LM
  - LME
  - LMEF
  - LMEK
  - LMES
  - LMF
  - LMK
- SAMICK BEARING HOUSING
  - SC
  - SCE
AUTOMATIC LUBRICATION PUMPS
- BATTERY DRIVEN
  - GREASE LUBRICATION
  - OIL LUBRICATION
- PLC DRIVEN 24V
  - GREASE LUBRICATION
  - OIL LUBRICATION
RACKS
- COMMERCIAL RACKS
  - EN8
- PRECISION RACKS
- GROUND RACKS
  - EN32 - GROUND TEETH (CASE HARD)
  - EN32 - GROUND TEETH (CASE HARD) PRE-DRILLED
- HELICAL RACKS
- ROUND RACKS
- NYLON RACKS
- HARDENED RACKS
SPUR GEARS
- COMMERCIAL GEARS
  - EN8
- PRECISION GEARS
- GROUND GEARS
  - EN32 GROUND TEETH (CASE HARDENED)
- HELICAL GEARS
  - EN8 MILLED TEETH
  - EN32 GROUND TEETH (CASE HARDENED)
- NYLON GEARS
- HARDENED GEARS
  - EN8 - INDUCTION HARDENED
BEVEL GEARS
- BEVEL GEARS - EN8 (1:1 RATIO)
  - 1.0 MODULE
  - 1.5 MODULE
  - 2.0 MODULE
  - 2.5 MODULE
  - 3.0 MODULE
  - 3.5 MODULE
  - 4.0 MODULE
  - 4.5 MODULE
  - 5.0 MODULE
  - 6.0 MODULE
- BEVEL GEARS - EN8 (1 : 1.5 RATIO)
  - 1.0 MODULE
  - 1.5 MODULE
  - 2.0 MODULE
  - 2.5 MODULE
  - 3.0 MODULE
  - 3.5 MODULE
  - 4.0 MODULE
  - 4.5 MODULE
  - 5.0 MODULE
  - 6.0 MODULE
- BEVEL GEARS - EN8 (1 : 2 RATIO)
  - 1.0 MODULE
  - 1.5 MODULE
  - 2.0 MODULE
  - 2.5 MODULE
  - 3.0 MODULE
  - 3.5 MODULE
  - 4.0 MODULE
  - 4.5 MODULE
  - 5.0 MODULE
  - 6.0 MODULE
- BEVEL GEARS - EN8 (1 : 2.5 RATIO)
  - 1.0 MODULE
  - 1.5 MODULE
  - 2.0 MODULE
  - 2.5 MODULE
  - 3.0 MODULE
  - 3.5 MODULE
  - 4.0 MODULE
  - 4.5 MODULE
  - 5.0 MODULE
  - 6.0 MODULE
- BEVEL GEARS - EN8 (1 : 3 RATIO)
  - 1.0 MODULE
  - 1.5 MODULE
  - 2.0 MODULE
  - 2.5 MODULE
  - 3.0 MODULE
  - 3.5 MODULE
  - 4.0 MODULE
  - 4.5 MODULE
  - 5.0 MODULE
  - 6.0 MODULE
- BEVEL GEARS - EN8 (1 : 4 RATIO)
  - 1.0 MODULE
  - 1.5 MODULE
  - 2.0 MODULE
  - 2.5 MODULE
  - 3.0 MODULE
  - 3.5 MODULE
  - 4.0 MODULE
  - 4.5 MODULE
  - 5.0 MODULE
  - 6.0 MODULE
BEVEL GEAR UNITS
- 1 : 1 RATIO
- 2 : 1 RATIO
- 3 : 1 RATIO
LEADSCREWS
- ROLLED - COMMERCIAL RANGE
- WHIRLED - PRECISION RANGE
- 2 - START LEADSCREWS
- HAND WHEELS
- DIGITAL INDICATORS
LEADSCREW NUTS
- RIGHT HAND NUTS
- LEFT HAND NUTS
- 2 - START NUTS
  - ROUND - BRONZE
  - FLANGED - BRONZE
COUPLINGS
- ROTEX ® JAW TYPE COUPLINGS - STEEL
- ROTEX ® GS BACKLASH FREE JAW
- ROTEX ® JAW TYPE COUPLINGS - CAST FINISH
- ROTEX ® JAW TYPE COUPLINGS - STAINLESS STEEL
- ROTEX ® GS BACKLASH FREE JAW COUPLING CLAMPING HUB TYPE
- ROTEX ® SPIDERS
- BOWEX ® CURVED TOOTH GEAR COUPLINGS
SCREW JACKS
- TRAVELLING SCREW TYPE
- TRAVELLING NUT TYPE
- STEEL TOP PLATES
- STEEL CLEVIS
- EXPANSION BELLOWS
- HAND WHEELS
SPLINED SHAFTS
- SIZE 6 X 11 X 14
- SIZE 6 X 13 X 16
- SIZE 6 X 16 X 20
- SIZE 6 X 18 X 22
- SIZE 6 X 21 X 25
- SIZE 6 X 23 X 28
- SIZE 6 X 26 X 32
- SIZE 6 X 28 X 34
- SIZE 8 X 32 X 38
- SIZE 8 X 36 X 42
- SIZE 8 X 42 X 48
- SIZE 8 X 46 X 54
- SIZE 6 X 28,14 X 34,94
SPLINED SLEEVES
- STEEL
- BRONZE
  - FLANGED BRONZE - WITHOUT HOLES
  - FLANGED BRONZE - WITH HOLES
TRANTORQUE BUSHES
- MINI SERIES
- GT STANDARD SERIES
WORMS & WHEELS
- 50MM CENTRES
- 63MM CENTRES
- 80MM CENTRES
- 100MM CENTRES
- 125MM CENTRES
SPROCKETS & CHAINS
- 3/8" PITCH (06B)
- 1/2" PITCH (08B)
- 5/8" PITCH (10B)
- 3/4" PITCH (12B-1)
- 1" PITCH (16B)
- 1 1/4" PITCH (20B)
- 1 1/2" PITCH (24B)
- 1 3/4" PITCH (28B)
- 2" PITCH (32B)
CUSTOMERS SPECIAL PARTS

1.0 MODULE

Note: Our stock is held in 1 metre lengths.

Please check this size for availability

Downloads Available

PDF 52.pdf

Product Code	Description	Price
148-010-602	RACK (QUAL 12) 1.0 MOD 10X10SQ 250MM NYLON P6	£7.95 (exc VAT)
148-010-605	RACK (QUAL 12) 1.0MOD 10X10SQ 500MM NYLON P6	£13.71 (exc VAT)
148-010-610	RACK (QUAL 12) 1.0 MOD 15X15SQ 1000MM NYLON P6	£27.19 (exc VAT)

Your basket is empty

	FIXED FLANGED BEARING UNIT SUIT 8mm SHAFT
	FIXED FLANGED BEARING UNIT SUIT 40mm SHAFT